導讀:后端開發后端開發 前言：Unrealserver(虛幻)你們不知道了解不了解，如果不了解我也不告訴你獨服一般都安裝虛擬化來充分發揮它的價值，當然單個ip的獨服也是有價值的，我們營銷型網站建設網站建設哪家好。

前言：

Unrealserver(虛幻)你們不知道了解不了解，如果不了解我也不告訴你

獨服一般都安裝虛擬化來充分發揮它的價值，當然單個ip的獨服也是有價值的，我們可以以nat端口的形式讓小雞連接外網，并且ipv6不值錢，上萬個ip可以自由分配，但是手動分配確實有點頭疼，但也不是絕對，本文介紹如何自動獲取ipv6與NATv4的小技巧

安裝PVE

安裝PVE這里省略，(因?yàn)槲覒羞€沒寫)

配置網卡

• 編輯 /etc/network/interfaces

auto lo iface lo inet loopback auto enp2s0f0 //網卡名稱 iface enp2s0f0 inet static address 66.181.XX.188/32 // ip gateway 100.64.39.xx //網關 iface enp2s0f0 inet6 static address 2604:abc0:1234:XX::2/128 gateway 2604:abc0:xxx:79::1 iface enp2s0f1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.0.1/24 bridge_ports none bridge_stp off bridge_fd 0 post-up /usr/sbin/iptables -t nat -A POSTROUTING -s '192.168.0.1/24' -o enp2s0f0 -j MASQUERADE post-down /usr/sbin/iptables -t nat -D POSTROUTING -s '192.168.0.1/24' -o enp2s0f0 -j MASQUERADE post-up /usr/sbin/iptables -t raw -I PREROUTING -i fwbr+ -j CT --zone 1 post-down /usr/sbin/iptables -t raw -D PREROUTING -i fwbr+ -j CT --zone 1 iface vmbr0 inet6 static address 2604:abc0:1234:xx::3/64

配置TCP

找到編輯 etc/sysctl.conf

net.ipv4.tcp_congestion_control=bbr net.core.default_qdisc=fq net.ipv4.conf.all.rp_filter=1 net.ipv4.icmp_echo_網站建設教程ignore_broadcasts=1 net.ipv4.conf.default.forwarding=1 net.ipv4.conf.default.proxy_arp = 0 net.ipv4.ip_forward=1 kernel.sysrq = 1 net.ipv4.conf.default.send_redirects = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.ip_for網站seo優化診斷工具ward=1 net.ipv6.conf.all.accept_dad = 1 net.ipv6.conf.all.accept_ra = 0 net.ipv6.conf.all.accept_redirects = 1 net.ipv6.conf.all.accept_source_route = 0 net.ipv6.conf.all.autoconf = 0 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.all.forwarding=1 net.ipv6.conf.all.proxy_ndp=1

配置HDCP V4

• 安裝HDCP 服務

#安裝hdcp apt install isc-dhcp-server #啟動查看狀態 systemctl status isc-dhcp-server #重啟hdcp service isc-dhcp-server restart #開機啟動 systemctl enable isc-dhcp-server

• 找到并編輯 /etc/default/isc-dhcp-server

INTERFACESv4="vmbr0" //網卡 #INTERFACESv6=""

• 找到打開 /etc/dhcp/dhcpd.conf

subnet 192.168.0.0 netmask 255.255.255.0 { option rouseo網站優化培訓ters 192.168.0.1; option subnet-mask 255.255.255.0; option domain-name-servers 8.8.8.8; range 192.168.0.2 192.168.0.100; }

關鍵詞標簽: NAT Proxmox IPV4 Unrealserver